5 key steps to teach you how to operate a cold recycling vehicle

In the field of road maintenance, cold recycling technology is becoming a new favorite in the industry with its advantages of environmental protection, high efficiency and low cost. However, for many construction workers who are new to cold recycling equipment, how to standardize operation is still an urgent problem to be solved. This article will use 5 key steps to disassemble the key points of the whole process of cold recycling vehicles. Whether you are a novice operator or an engineering supervisor who needs technical review, you can quickly master the core essentials through this practical guide.

Preparation

1. Confirm that the location of the cold recycling road mixer is flat and safe, and there are no people or obstacles around.

2. Confirm that all connecting pipes, circuits, etc. are firmly connected and normal.

3. Confirm that the required raw materials and tools are available.

Start-up operation

1. Turn on the main power switch and check whether the voltage and frequency are normal. Confirm whether the power cord is normal and the grounding is reliable.

2. Turn on the cold recycling road mixer switch and operate according to the instructions on the operation panel. It should be noted that no objects should be allowed to approach the moving parts.

3. Confirm that the dashboard display is normal.

Production operation
1. Confirm the type and proportion of the required raw materials and put the materials into the mixing tank.

2. Add water according to the formula and turn on the agitator to mix. The mixing time is generally 3-5 minutes.

3. After mixing, turn on the pump for delivery as required and proceed to the next production operation.

Precautions
1. During operation, do not put your hands or other objects into the running mixing tank or delivery pipeline to avoid accidents.

2. Check the pipeline regularly for leaks and replace and maintain it if necessary.

3. Relevant personnel need to operate proficiently and abide by the operating procedures to ensure production quality.

Shutdown operation
1. Turn off the pump and agitator and empty the material in the tank.

2. Turn off the cold regeneration road mixer and turn off the main power switch.

The above is the operation method of the cold regeneration road mixer. I hope this article can help you. When using cold recycled road mixer, you must pay attention to safe operation to ensure a smooth and safe production process.

After reading this article, will it help you know more about the cold recycling vehicles? If you are interested in purchasing, you can contact us or take a look at our related products.

Click here to visit our web.

Click here to visit our alibaba （There are more kinds of  products）.

We also provide the related accessories. If you need, you can contact us directly and we will provide you with the most suitable products according to your needs.