XCMG's Aerial Work Platforms' "Security and Efficiency Code"

XCMG has always prioritized "technological innovation" as its core product competitiveness, achieving breakthroughs in numerous key technologies within the aerial work platform sector. This has significantly enhanced product performance across the board, from safety protection and operational experience to intelligent control.

(I) Safety Protection: Building a "Triple Safety Barrier"

Structural Safety: Key components such as the boom and outriggers are constructed of Q690 high-strength steel and have passed 100,000-cycle expansion and contraction fatigue testing (far exceeding the industry standard of 80,000 cycles). The vehicle body is equipped with anti-roll sensors that automatically shut off the boom and issue an alarm when the vehicle tilt exceeds 3°. The work platform features dual guardrails (1.2 meters high) and anti-slip steps to prevent falls and tool slips.

Hydraulic Safety: A dual-circuit hydraulic system ensures smooth boom lowering even if one circuit fails. Hydraulic locks and counterbalance valves provide dual protection to prevent the boom from accidentally sliding down. In emergencies such as power or fuel outages, the platform can be lowered using a manual emergency valve.

Intelligent Safety: Some high-end models are equipped with a "360° panoramic image + millimeter-wave radar" system, which monitors obstacles around the vehicle in real time and automatically decelerates when approaching. The work platform is equipped with a "one-touch emergency stop" button that directly cuts off the vehicle's power, with a response time of less than 0.5 seconds.

(II) Efficient Operation: Technology Empowers "Cost Reduction and Efficiency Improvement"

Fast Lifting Technology: Straight-arm models utilize a "dual-pump combined flow" hydraulic system, achieving a boom lifting speed of up to 0.8m/s, a 20% increase over the industry average. Scissor-type models utilize "synchronized lifting technology" for smooth, tilt-free platform lifting and lowering, with positioning accuracy of ±5mm, meeting high-precision installation requirements.

Energy-Saving Technology: New energy vehicles are equipped with an "energy recovery system" that converts the boom's gravitational potential energy into electricity to recharge the battery during lowering, increasing driving range by 15%. Fuel-powered vehicles utilize "intelligent idle control" that automatically reduces the engine to idle speed after an operation pause of more than 30 seconds, reducing fuel consumption by 10%. Convenient Operation: All models are equipped with a "pilot-operated joystick" that requires only 5N of operating force (approximately 1/3 that of a traditional joystick), reducing operator fatigue. Some models support "wireless remote control," allowing operators to flexibly control the vehicle from the ground or on a platform, making it particularly suitable for remote operations in hazardous scenarios.

(III) Intelligent Upgrade: Towards "Unmanned Operation"

XCMG continues to explore the intelligentization of aerial work vehicles and has launched an integrated "remote control + autonomous driving" solution:

Remote Control: Using the 5G/Beidou positioning system, operators can view vehicle status (operating height, load, battery level, etc.) in real time from the central control room and remotely control boom movements, achieving "man-machine separation" and avoiding the risks of high-altitude operations.

Autonomous Driving: In closed parks (such as logistics parks and factories), the vehicle uses LiDAR and vision navigation to automatically plan routes and avoid obstacles, completing the entire unmanned operation process of "fixed-point material collection - aerial work - automatic return." This solution has been deployed in multiple smart logistics parks across China.

If you're looking for a high-performance, cost-effective aerial work platform, contact us! With over 20 years of experience in engineering machinery sales, we're sure to provide you with a great shopping experience!

If you need spare parts for your engineering machinery, you can also visit our spare parts website or Alibaba:

Click here to visit our spare parts web

Click here to visit our alibaba （There are more kinds of  products）